Solarback MPPT solar charger
CHECK !!
01. MPPT controller with the latest processor technology
The GSP Solarback 200W controller is a switching solar charger that applies the latest microprocessor technology to optimally charge not only lithium iron phosphate and lithium ion, but also Gel / Dryfit / AGM / fleece or Acid / Lead-acid. In addition, it has overload protection and overcharge protection, which reduces battery charging current when exposed to excessive sunlight and ensures that the battery is always charged in the best condition.
Place the controller near the main battery and be sure to observe the polarity connections of the solar panel and battery. To prevent cable fire, connect a fuse near the battery (+) pole.
MODEL | CAMPER-D 100A |
Capacity of Solar Module (recommended / max.) : | 200Wp |
Current Solar Module : | 0 - 12A |
Voltage Solar Module (Voc) : | Max. 50A |
Nominal Voltage of Batteries Mainl and Start Ⅱ : | 12V |
Charging Current : | 0 - 15A |
Current Consumption Stand-by (max.): | 8 -16mA |
|
|
Main Port Battery Ⅰ: | |
Charging / Floating / Load Current : | 10 - 15A |
Charging Voltage Limitation (max.) : | 17V |
Overload Protection (current limiting device) | YES |
Intergrated Protection against Short-circuit : | YES |
Intergrated Protection against Overtemperature : | YES |
Intergrated Cooling Fan with Temp. Control : | YES |
Unit Fuse(Type FKS) : | 30A |
Input for BatteryⅠTemperature Sensor : | YES |
Charging Timer | 3-fold |
Dimension, incl. Mounting Flanges (mm) : | 147 X 74 X 40mm |
weight : | 340g |
Ambient Conditions, Humidity of Air : | max. 95% RH,no condensation |
L : length / W : Width / H : height
If you need further information. please contact to us.
| Name | |
|---|---|
| Tel | - - |
| Contents |
